When you first turn on your Meta Quest headset, visit www.meta.com/device and enter the code shown inside.

This quick pairing step links your headset to your Meta account, giving you access to apps, games, cloud saves, social features, and automatic updates.

What is www.meta.com/device (or work.meta.com/device)?

The purpose of the device pairing link.

Once your headset starts up, a message will pop up saying “Enter code at www.meta.com/device.” Don’t worry—this is just asking you to connect your headset to your Meta account.

You go to that URL (or sometimes auth.meta.com/device) on a phone or PC, log in (if not already), and input the code. 

This step checks that the headset is yours and confirms it’s linked to your account.

In short, www.meta.com/device isn’t the usual login for your Meta account. It’s a special place to enter the pairing code from your headset.

work.meta.com/device” / “auth.meta.com/device” variation

In some support or setup documents, Meta mentions work.meta.com/device. Enter your device code here, especially in corporate or enterprise settings. 

Also, some pairings use auth.meta.com/device behind the scenes. 

Users report that the actual URL behavior can change. For example, it might redirect between auth.meta.com, account.meta, or work.meta. 

The key is: you need a valid Meta account session ready when you enter the code.

Why this step matters (security, sync, feature unlock)

• It prevents random headsets from attaching to your account.
• It enables cloud sync, library access, multiplayer / social features, and over-the-air updates.
• Without pairing, the headset feels “locked.” You’ll keep seeing prompts to enter codes. Some users report the headset becomes unusable if pairing fails.

How to Find the Pairing / Activation Code

This step happens within the headset UI itself.

1. Power on the headset

• If it’s brand new or factory reset, it should go into initial setup mode.
• If not, you may need to reset or restart.

1. In-headset prompt

• You’ll see a screen that says, “Use this code to connect your device” or “Go to www.meta.com/device and enter this code.”
• The code is usually numeric, consisting of 5, 6, or 8 digits, or it can be alphanumeric.

1. If not visible

• In the headset’s Settings → System → About or Device Settings, there may be a “Pairing Code” field.
• Some headset models display the code during the activation flow (you can’t skip it).

• Make a note (or screenshot) without delay.

• Codes often expire after a short interval (minutes).
• Don’t close or exit the pairing screen before entering the code on the external device.

Step-by-Step: How to Pair by Entering Code at www.meta.com/device

Step	What to Do	Tips & Checks
1. On your phone/computer, open a browser and go to www.meta.com/device (or auth.meta.com/device / work.meta.com/device)	If you’re not already signed in, log in with your Meta account credentials (email + password, or via linked Facebook)	Use a browser like Chrome or Safari rather than a restricted browser. Some users say switching browsers helped when “code expired” errors appeared.
2. You’ll see a field to enter the code shown in your headset	Type (or paste) the code exactly as seen (case sensitive, if applicable)	Avoid trailing spaces or extra characters
3. Submit / Confirm	After success, the headset may reboot or automatically continue setup	Wait patiently — give it a minute
4. Resume in-headset setup	The headset will continue its flow (network, guardian, account settings)	Don’t power off mid-step

Alternate path (via mobile app):

Instead of entering via browser, you may pair via the Meta Quest mobile app (Android / iOS). 

Once logged in there, the headset may show up to “add a new device” or “pair a device.” Enter the code via the app itself. This can sometimes bypass browser-based blocking issues.

Code accepted but headset stuck on “Finish setup on another device

Some users say that after entering the code, the headset shows “Finish on another device” and then freezes.

Remedies:

• Reboot the headset by hand after confirming the pairing through the browser.
• Make sure the browser tab has finished its task. Close or refresh the page before putting the headset back on.
• Enter the code on another device, like a laptop instead of your phone.
• In extreme cases, delete the account, reboot, and try pairing anew.

Email not associated with account” / “Email is wrong” errors

Some see errors like “it looks like there isn’t an account associated with that email address. Others report “email is wrong” even though they are sure it’s correct.

Possible causes:

• Using a different Meta/Facebook/Instagram account than intended.
• The headset account is still linked to an old Oculus account. This account hasn’t finished the migration process.
• Login / account linking issues.

What users can do:

• Double-check you are logging in with the right email / account.
• If before migrated from Oculus to Meta, verify the migration is complete.
• Reset the headset and re-initiate pairing using the proper account.
• Contact Meta support if the issue persists.

Pairing not working / no headset found.

One common complaint: you input the code, but the system says “no headset found” or “no device detected.

Potential fixes:

• Turn on the headset and set it to pairing mode.
• Make sure your phone or computer is on the same Wi-Fi.
• Update the headset and app.
• If it doesn’t work, reset the headset and try again.
• The headset may ask for a new code each time it’s turned on.

Frequent re-prompting for code on each start.

Some users say that every time they power on, the headset asks for a new pairing code.

Possible causes:

• Someone made an error in the pairing at an earlier time.
• System bug / OS glitch.
• Account sync issues.

Fixes:

• Go through the pairing again with careful attention to ensure confirmation.
• Update the headset OS (Horizon / Quest OS).
• Clear login sessions or re-login.
• As a last resort, factory reset.

Browser redirect / login loops.

Some users can’t log into the Meta account page or the pairing page. This is due to redirect loops, broken 2FA, or stuck authentication portals.

Workarounds:

• Clear your browser cookies.
• Turn off ad blockers or other browser extensions.
• Try a different network, like a mobile hotspot.
• Ask Meta support for account recovery.

Differences Across Quest Models & Software

Quest 2 vs Quest 3 / Quest Pro

• Quest 2 uses a simple 5-digit code.
• Quest 3 and Pro may use a longer code, letters, or a QR code.

• Some new models let you pair using QR codes or apps. This means you can avoid entering codes manually.

Horizon OS updates & behavior changes.

Meta’s headset ecosystem now runs Meta Horizon OS (recently rebranded). System changes can alter pairing flow, UI prompts, or error handling. Always keep devices updated to the latest OS versions.

Example User Flows & Q&A

Here are some hypothetical user Q&A formats you can sprinkle in your article to target user intent.

Q: My headset shows a pairing code, but when I go to meta.com/device, it says invalid code.

A: Likely the code expired (codes are short-lived). Restart your headset. Then, generate a new code. Clear your browser cache or use private mode. Also, check that you’re logged into the correct Meta account before entering.

Q: I entered the code successfully, but the headset still shows ‘Finish setup on another device’ forever.

A: Try rebooting the headset. Confirm that your browser tab finished submission and didn’t get stuck. If not, try using a different browser or device for the pairing request.

Q: It says my email is not associated with any account when entering the code.

A: That error usually means you’re using a different account. The headset expects a specific one. Check your email and login. Ensure your account has migrated from Oculus to Meta, if needed. Then, try pairing again.

Q: Every time I turn on my headset, it asks for a new pairing code.

A: This means the pairing didn’t finish correctly or there’s a minor system bug. Redo the pairing with attention to detail. Ensure system updates are installed. If persists, factory reset.

Conclusion.

Pairing your Meta headset via www.meta.com/device is a small but critical step in the setup.
It connects your hardware to your account. It unlocks features and keeps your VR experience synced and secure.

 
You can fix most errors. These include expired codes, account mismatches, and browser issues. Use the strategies above. Check you’re on the right account. Use new codes. Keep your software updated. If you need help, contact Meta support.

Once your pairing is solid, you can dive into immersive worlds. Invite friends, stream, or explore new experiences in Meta Horizon OS.

Disclaimer.

This guide is only for learning and help. We are not connected with Meta Platforms, Inc. All product names and trademarks belong to their owners. For official support, always use the real Meta website at www.meta.com.

We offer simple guidance to help users understand the setup process. Any action you take from this content is your choice. We are not responsible for any technical issues or errors that may occur.

About Us.

Note: We are an independent help website. We are not connected with Meta Platforms, Inc. or its partner brands, and we will never ask for your personal or payment details. Our guides only link to trusted Meta pages like www.meta.com/device and the official Meta Help Center.

We focus on real experience. This includes setting up Meta devices, testing activation codes, and troubleshooting login issues. Each article comes from hands-on testing. They update their info to show the latest changes in Meta devices and services.

“Meta,” “Meta Quest,” and all related trademarks are the property of Meta Platforms, Inc. We use them only for identification and educational purposes to assist users.